Discussion:
[N8VEM-S100:7130] Ram/Rom v2 boards?
Kryoclasm (Shawn)
2015-05-31 07:17:17 UTC
Permalink
Just wondering if anyone has a spare ram/rom v2 board they would sell?

Shawn
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
John Monahan
2015-05-31 15:47:58 UTC
Permalink
All gone here Shawn. Two options:-
See if others and yourself want to do a second run. From China, min order 4 boards. "Tooling cost is $77, ~$12/board + shipping.
I POSSIBLY have a prototype still around here. Same a above but tin fingers. May have one or two "patches" Would have to look.
Cannot do it now.
John


-----Original Message-----
From: n8vem-***@googlegroups.com [mailto:n8vem-***@googlegroups.com] On Behalf Of Kryoclasm (Shawn)
Sent: Sunday, May 31, 2015 12:17 AM
To: n8vem-***@googlegroups.com
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?

Just wondering if anyone has a spare ram/rom v2 board they would sell?

Shawn
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Todd Goodman
2015-05-31 15:57:41 UTC
Permalink
If someone is going to do a second run of a board that was ordered
from PCBCart originally, then using the original part number and order
# will eliminate the tooling costs. PCBCart has eliminated the
tooling costs for me even if the boards were originally ordered by
someone else.

I've also had PCBCart allow silkscreen changes without a tooling cost
(as long as the copper layers haven't changed) but I don't if that's
official policy or not.

Todd
Post by John Monahan
All gone here Shawn. Two options:-
See if others and yourself want to do a second run. From China, min order 4 boards. "Tooling cost is $77, ~$12/board + shipping.
I POSSIBLY have a prototype still around here. Same a above but tin fingers. May have one or two "patches" Would have to look.
Cannot do it now.
John
-----Original Message-----
Sent: Sunday, May 31, 2015 12:17 AM
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Don Caprio
2015-05-31 16:24:44 UTC
Permalink
You guys should consider checking out PCBway.com.

I just priced qty 25 S-100 cards and it was $202 which includes DHL
shipping ($57).
Thats about $8.00 a board. I've used them four times now and am very
pleased with the results.
Post by John Monahan
All gone here Shawn. Two options:-
See if others and yourself want to do a second run. From China, min order 4 boards. "Tooling cost is $77, ~$12/board + shipping.
I POSSIBLY have a prototype still around here. Same a above but tin fingers. May have one or two "patches" Would have to look.
Cannot do it now.
John
-----Original Message-----
Sent: Sunday, May 31, 2015 12:17 AM
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
Don Caprio
***@gmail.com
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Bob Bell
2015-05-31 16:37:14 UTC
Permalink
Does anyone even consider using PCB fabs in the US anymore?

Bob Bell


-----Original Message-----
From: n8vem-***@googlegroups.com [mailto:n8vem-***@googlegroups.com] On Behalf Of Don Caprio
Sent: Sunday, May 31, 2015 12:25 PM
To: n8vem-***@googlegroups.com
Subject: Re: [N8VEM-S100:7137] Ram/Rom v2 boards?

You guys should consider checking out PCBway.com.

I just priced qty 25 S-100 cards and it was $202 which includes DHL shipping ($57).
Thats about $8.00 a board. I've used them four times now and am very pleased with the results.
Post by John Monahan
All gone here Shawn. Two options:-
See if others and yourself want to do a second run. From China, min order 4 boards. "Tooling cost is $77, ~$12/board + shipping.
I POSSIBLY have a prototype still around here. Same a above but tin fingers. May have one or two "patches" Would have to look.
Cannot do it now.
John
-----Original Message-----
On Behalf Of Kryoclasm (Shawn)
Sent: Sunday, May 31, 2015 12:17 AM
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
Don Caprio
***@gmail.com

--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
John Monahan
2015-05-31 17:38:44 UTC
Permalink
Don is that with real gold (not plated) fingers. I would like to find an outfit that does quantities 3 with gold for my prototype runs. That way if it works (seldom!) I don't have to do another. I go through a lot of prototypes (see picture of last 2 years' worth!). Yes I screw up a lot.

Currently I use Advanced Circuits for prototypes. OK boards $33 each but no gold. I like PCBCart for finals. Outstanding quality, they are great at correcting minor errors, flexible with "last minute changes" etc. The only problem is the shipping from China. Not an issue for a large number of boards, but in 2-4 board quantities almost the same cost.

John


-----Original Message-----
From: n8vem-***@googlegroups.com [mailto:n8vem-***@googlegroups.com] On Behalf Of Don Caprio
Sent: Sunday, May 31, 2015 9:25 AM
To: n8vem-***@googlegroups.com
Subject: Re: [N8VEM-S100:7137] Ram/Rom v2 boards?

You guys should consider checking out PCBway.com.

I just priced qty 25 S-100 cards and it was $202 which includes DHL shipping ($57).
Thats about $8.00 a board. I've used them four times now and am very pleased with the results.
Post by John Monahan
All gone here Shawn. Two options:-
See if others and yourself want to do a second run. From China, min order 4 boards. "Tooling cost is $77, ~$12/board + shipping.
I POSSIBLY have a prototype still around here. Same a above but tin fingers. May have one or two "patches" Would have to look.
Cannot do it now.
John
-----Original Message-----
On Behalf Of Kryoclasm (Shawn)
Sent: Sunday, May 31, 2015 12:17 AM
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
Don Caprio
***@gmail.com

--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Matthew Turner
2015-05-31 16:06:01 UTC
Permalink
I'll take a look through my stack of boards. Think I might have one. I'll contact off-list if one turns up.



Regards,



Matt Turner
Date: Sun, 31 May 2015 00:17:17 -0700
Subject: [N8VEM-S100:7130] Ram/Rom v2 boards?
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Tom Lafleur
2015-05-31 17:04:58 UTC
Permalink
I have an extra..

$20 +$3 shipping in USA
Post by Kryoclasm (Shawn)
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
For more options, visit https://groups.google.com/d/optout.
--
~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~

Tom Lafleur
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Kryoclasm (Shawn)
2015-05-31 17:30:53 UTC
Permalink
That's great. Send my your paypal info and I will send you payment.

Thank you.

Shawn
Post by Tom Lafleur
I have an extra..
$20 +$3 shipping in USA
Post by Kryoclasm (Shawn)
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
For more options, visit https://groups.google.com/d/optout.
--
~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~
Tom Lafleur
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Tom Lafleur
2015-05-31 17:40:33 UTC
Permalink
Post by Kryoclasm (Shawn)
That's great. Send my your paypal info and I will send you payment.
Thank you.
Shawn
Post by Tom Lafleur
I have an extra..
$20 +$3 shipping in USA
Post by Kryoclasm (Shawn)
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
For more options, visit https://groups.google.com/d/optout.
--
~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~
Tom Lafleur
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
For more options, visit https://groups.google.com/d/optout.
--
~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~

Tom Lafleur
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Kryoclasm (Shawn)
2015-06-02 02:28:44 UTC
Permalink
Ok, payment sent.
Post by Kryoclasm (Shawn)
Just wondering if anyone has a spare ram/rom v2 board they would sell?
Shawn
--
You received this message because you are subscribed to the Google Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem-s100+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Loading...