[N8VEM-S100:7471] V3 SMB BOM question

[John Parsons]

I have a question regarding R103 on the V3.1 SMB, which is listed as a 22
Meg ohm resistor on the schematic and on Rick Bromagem's BOM files. I can't
find any axial 22 Meg ohm resistors on Jameco or Mouser. Digikey has them
as non-stock with 2K minimum order. Could this part be a 2.2 Meg ohm? Or
does someone have a part number somewhere? Or do I need to use an SMT part?

BTW, the file listed on the S100 site as the KiCAD V3.1 BOM is really the
V2 BOM. Bill's Excel BOM does not have a value given for C101. It is
correct on Bill's PDF. I'm not complaining, just trying to help others in
the future. :-)

Help with the 22meg resistor is appreciated!

JohnP

[John Monahan]

10M (Jameco #691817) is probably OK, John.







From: n8vem-***@googlegroups.com [mailto:n8vem-***@googlegroups.com] On Behalf Of John Parsons
Sent: Thursday, July 30, 2015 7:32 PM
To: N8VEM-S100
Subject: [N8VEM-S100:7471] V3 SMB BOM question



I have a question regarding R103 on the V3.1 SMB, which is listed as a 22 Meg ohm resistor on the schematic and on Rick Bromagem's BOM files. I can't find any axial 22 Meg ohm resistors on Jameco or Mouser. Digikey has them as non-stock with 2K minimum order. Could this part be a 2.2 Meg ohm? Or does someone have a part number somewhere? Or do I need to use an SMT part?

BTW, the file listed on the S100 site as the KiCAD V3.1 BOM is really the V2 BOM. Bill's Excel BOM does not have a value given for C101. It is correct on Bill's PDF. I'm not complaining, just trying to help others in the future. :-)

Help with the 22meg resistor is appreciated!

JohnP

[John Parsons]

Thanks, John!

I have some of the 10 Megs and will use one here.