[N8VEM-S100:7352] how to order S-100 boards ?

[Pierre ROUSSIERE]

hello to all,
I am a french newbie on this forum
I am also hamradio (my call F1FCO)
I have build some N8VEM cards (100x160 mm) size : a 12 slots backplane, a
Z80 SBC, a PROP_I/O, a bus monitor...

but now I want to build a S-100 system

do you have boards to sale ?
I need :
a backplane, and also 2x50 pins connectors
a Z80 board
a memory board
a front panel control board
a Propeller console I/O board

do you have them to sale ?

thank you for answer
private message : f1fco at free dot fr

best regards from Pierre
I live at NIMES, south of France

is it French Users here ?

[Philippe Elie]

Hello Pierre,

Yes there is at least one French NV8EM fan here ! We met already open the Silicium forum...

You can check the inventory of available cards there : http://n8vem-sbc.pbworks.com/w/page/35044530/PCB%20Inventory
There are regular new batches ordered so you can check in the group messages and add your name to the list. As for the s100 connectors, it 's a bit more difficult but you can either get them on eBay (which I did), buy them online (Anchor has them, they are based out in SF, I am not sure they ship in Europe but you may certainly ask). Alternatively, in order to get you started quickly, you should consider buying a complete motherboard, with all connectors installed. My system is based on a German Salota board I found on eBay, works fine, I later on a termination board to get to higher speeds but as a start, I think that's a valid option.

Philippe

[Todd Goodman]

Post by Philippe Elie
Hello Pierre,
Yes there is at least one French NV8EM fan here ! We met already open the Silicium forum...
You can check the inventory of available cards there : http://n8vem-sbc.pbworks.com/w/page/35044530/PCB%20Inventory
There are regular new batches ordered so you can check in the group messages and add your name to the list. As for the s100 connectors, it 's a bit more difficult but you can either get them on eBay (which I did), buy them online (Anchor has them, they are based out in SF, I am not sure they ship in Europe but you may certainly ask). Alternatively, in order to get you started quickly, you should consider buying a complete motherboard, with all connectors installed. My system is based on a German Salota board I found on eBay, works fine, I later on a termination board to get to higher speeds but as a start, I think that's a valid option.
Philippe

In addition, for connectors, I have them available from a bulk order at
Mouser. They're more expensive than Anchor (those prices are crazy
good!) so if one can get them from Anchor that's the way to go.

But if that falls through then I have them for sale too.

Todd